Ocean-optics USB-AOUT User Manual download pdf

193-00000-000-01-201304 1

USB-AOUT

Analog Output Module

Installation and Operation Instructions

Description

The USB-AOUT is a digital-to-analog accessory that connects directly to the 10-pin input connector

on the Ocean Optics USB2000 or USB4000 Spectrometer. It emits an analog current ranging from 4 to

20 mA (based on a user-configurable scale) from Pin 8 of its 10-pin output. The analog current varies

based on a specific wavelength intensity obtained from OOIBase32 or SpectraSuite Spectrometer

Operating Software. The USB-AOUT does not require an external power supply, as the spectrometer

powers the unit via the accessory connector.

The USB-AOUT is an ideal solution for system integration configurations. It is designed to be a

custom configurable trigger mechanism based on current levels. You must configure the specific

events to be triggered separately in your configuration.

Parts Included

The USB-AOUT ships with the following items:

• USB-AOUT digital-to-analog output module

• Thumbscrew (to secure the USB-AOUT to the spectrometer)

1 2 3 4 5 6

193-00000-000-01-201304 1 USB-AOUT Analog Output Module Installation and Operation Instructions Description The USB-A

USB-AOUT Installation and Operation Instructions 2 193-00000-000-01-201304 Using the USB-AOUT The following sections provide instructions on settin

USB-AOUT Installation and Operation Instructions 193-00000-000-01-201304 3 6. Specify the wavelength you wish to monitor in the Wavelength (nm) bo

USB-AOUT Installation and Operation Instructions 4 193-00000-000-01-201304 Scope Mode Example If you are in Scope Mode and wish to scale the 4-20 m

USB-AOUT Installation and Operation Instructions 193-00000-000-01-201304 5 You can verify correct operation of your trigger and the USB-AOUT device

USB-AOUT Installation and Operation Instructions 6 193-00000-000-01-201304

No comments

Ocean-optics USB-AOUT User Manual