ADC2000-PCI A/D Converter Operating Instructions Offices: Ocean Optics, Inc. 830 Douglas Ave., Dunedin, FL, USA 34698 Phone 727.733
Troubleshooting 3 Troubleshooting The following sections contain information on resolving some of the most common problems encountered when using t
Troubleshooting Resolution: To resolve synchronization problems: 1. Exit OOIBase32 software. 2. Restart the PC. ADC2000-PCI Operating Instruction
Appendix 1 - Specifications Appendix 1 – Specifications ADC2000-PCI Specifications Dimensions: 168.8 mm x 127.9 mm x 18.3 mm Weight: 90 g Power co
Index A A/D Interface Tab, 5 Appendix 1, 9 C Configure, 3 Spectrometer, 4 Correcting Device Driver Issues, 2 D Data Acquisition, 6 Device Driver Inst
Copyright © 2002-2005 Ocean Optics, Inc. All rights reserved. No part of this publication may be reproduced, stored in
Table of Contents 1 Overview...
ADC2000-PCI Overview 1 Overview The ADC2000-PCI internal PC A/D Converter is a plug-and-play high-speed analog-to-digital (A/D) converter designed
Installing and Using the ADC2000-PCI 2 Installing and Using the ADC2000-PCI This chapter provides instruction on installing and configuring the AD
Installing and Using the ADC2000-PCI 4. Locate an open PCI-bus slot on the PC motherboard and remove the slot protector from the rear of the PC.
Installing and Using the ADC2000-PCI 2. Select S2000/PC2000/USB2000/HR2000 from the Spectrometer Type drop-down menu. Select ADC2000-PCI from the
Installing and Using the ADC2000-PCI A/D Interface Tab Enter the same values as you did in the Configure Hardware dialog box in the first part of t
Installing and Using the ADC2000-PCI Configuring Data Acquisition Select Spectrum > Configure Data Acquisition from the OOIBase32 menu bar to op
Comments to this Manuals