Ocean-optics HL-2000 User Manual download pdf (Page 15)

000-10000-050-02-201307 7

Appendix A

Bulb Replacement

Overview

To order replacement bulbs for the HL-2000, consult the Parts List.

WARNING

Before replacing the bulb in the HL-2000, disconnect the lamp from your power

source and allow the unit to cool for at least twenty minutes, if necessary.

Identifying the Bulb Type

► Procedure

Perform the steps below to identify the bulb type:

1. Unplug the power connector from the power socket on the HL-2000.

2. Loosen the screws on the rear of the unit with the provided 2.5mm Allen wrench.

3. Remove the backside of the HL-2000 and remove the electronics board from the HL-2000, taking

particular care not to disconnect the fan wires.

4. Remove the screws from the bottom plate of the unit with the provided 1.3mm Allen key.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

No comments

Ocean-optics HL-2000 User Manual Page 15