Ocean-optics NIR User Manual download pdf (Page 14)

2: Installation

If you do not have web access, you can retrieve this document from the Software and Technical

Resources CD included with your spectrometer shipment.

NIR Controls

There are a number of controls for the NIR Spectrometer that are available in through the spectrometer

operating software. The software differs as to where these controls are located.

SpectraSuite NIR Spectrometer Features

Select Spectrometer | Spectrometer Features, then select the TEC tab to display the NIR Spectrometer

controls.

Control Description

Enable Thermo-

Electric Control

Check this box to enable (recommended setting for laboratory conditions) or

uncheck to disable the thermoelectric cooler.

Detector Set Point Enter the target temperature of the NIR Spectrometer detector as follows:

• NIR512: Minimum is –10 ºC, Recommended is –5 ºC

• NIR256: Minimum is –15 ºC, Recommended is –10 ºC

The TEC and fans will operate until the detector reaches this temperature.

Detector

temperature

Displays the current temperature of the detector in the NIR Spectrometer.

8 197-00000-512-02-0707

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

No comments

Ocean-optics NIR User Manual Page 14